Frequently Asked Questions

How much space will I save if I buy the Toy Stacker product?
It depends on the space you currently have and what you are using it for. Some customers can fit 1 or 2 additional Quads in a normal Toy Hauler. Others can fit 2 Quads easily in the back of their Truck Bed. The more ToyStackers you buy for each Quad, the more space you will save.
If I am putting more ATV’s in the back of my trailer, should I be concerned with the manufacturer’s weight rating recommendations?
You should always be aware of the manufacturer’s suggested weight ratings. Most trailers allow for more cargo weight than you are typically able to hold in a normal set-up. Since our products allow you to haul more in your space, most haulers can handle the additional weight and not exceed the manufacturers recommended rating.
Will my Quad leak fluids by standing upright?
We suggest that you always turn off your gas, as your ATV manufacturer suggests during transport. Other than that, if you have a normal working gas tank, tubes and an engine that doesn’t normally leak fluids standing flat, then you will have no issues using our products effectively.
Is it safe?
Our products are completely safe. Products such as the ToyStacker and ToySideLoader require you to properly secure the product to your trailer or Truck with good working tie-downs. Failure to do so can result in a serious accident, injuring yourself, someone else, your trailer or Truck, or the ATV itself. Please read your instructions sheet upon receiving our product and visit our Disclaimer Page for more information.
Email support with specific questions.
Do your Products work with all types and sizes of Quads?
Yes, the all of our products work with Sport and 4X4 type Quads and will fit any size, whether it’s a small 250cc or a large 800cc, and of course, anything in between. If you want to stack a children's Quad, please purchase our Child ToyStacker.
Where can I store the ToyStacker product while camping?
The product will fold up nicely and fit either under your trailer or in the back of your Truck Bed. It will be out of the way when you’re not using it, taking up very little space.
Will the ToyStacker or ToySideLoader work with my existing Toy Hauler, Truck or Cargo Trailer tie downs?
Yes, it will. Some customers prefer to add additional tie-downs to their Toy Hauler because there are now more Quads in their trailer, but the existing tie-downs have proven to work just fine.
When will I receive my order?
Please see our Shipping Page for details.
Does Toy Stacker build customized solutions for its clients?
Yes. We can build almost anything that you can think up. Whether you have a complete design or just an idea, we can typically engineer and build it. Please visit our Customized Solutions page for more information.
I have a Dune Buggy (or Sand Rail). Do you have a product where I can transport both my Quad and Dune Buggy (or Sand Rail) in my Toy Hauler?
Yes, please visit our customized solutions page and fill out our quick form.
Email support with specific questions.
Are your products easy to load and unload?
Yes. We understand that it is hard work loading your Quads, gear and equipment. Our products are lightweight and easy to load and unload. We want to make your ATV loading experience easier for you and that’s exactly what you’ll encounter with our products.
Will any of your products move or shift during transport while I have an ATV loaded on it?
No. Whether using the ToyStacker, ToySideLoader or a Customized Product built to your specifications, you must follow our install instructions completely. If you follow the guidelines for the product, your ATV will be transported securely.
How much weight will the ToyStacker or SideLoader hold?
Our products have been tested rigorously and will withstand the weight of any ATV. It is suggested that only ATV’s should be used with these products.
How does the ATV get loaded on to the ToyStacker? Do I have to push or ride it up the A-Frame?
No. There is a 1500 lb. load capacity hand-winch that attaches to your front bumper. With a couple turns of the winch, the ATV is loaded at the top with minimal effort.
Will the ToyStacker or Side-Loader work with any type of Toy Hauler, Cargo Trailer or Truck?
Yes. Our products are versatile and will work with any type of set-up you have.
How much do Toy Stacker products weigh?
Our rack products are made from high-grade aluminum. Aluminum is lightweight and sturdy. Most products weigh less than 60 lbs.
Will my ATV's engine be damaged at all being lifted upright?
No. Our ToyStacker product is designed at the right angle to avoid any unnecessary fluids from flowing where they shouldn't. Using our product is no different than popping a wheelie and riding it down the trail or beach.
I have a question that wasn't answered here, who should I contact?
Visit our "Contact Us" page for the appropriate contact or Email Support with specific questions. We will get back to you as soon as possible.